M/V Infinity

Cruising with Isabelle, the wonder dog.
Home
What's New
About Us
Cruising Log
Cruising Slide Shows
Refits
Refit 2004
Refit 2008 Work Items
Refit 2008 June
Refit 2008 July
Refit 2008 December
Refit 2008 Drawings
Refit 2009
To refit or to sink it
Refit Slide Shows
Vessel Specifications
Shilshole
Contact Us
Rust never sleeps
Projects
Acknowledgements
Site Map
After cruising with friends and family for a few seasons, we uncovered a number of issues with the sea-worthiness of our boat, as well as a number of upgrades we would like to make. In June 2008, we will return to Delta Marine in Seattle WA to address the following items:
 
Galley:
  • replace 5 lb latches with 10 lb latches on all drawers, and some cupboards
  • secure the garbage compactor
  • add foot/chair rail on the island bar to secure the barstools while underway
  • replace broken dimmer switch
  • replace/repair exhaust fan over cooktop
  • upgrade latch on refrigerator/freezer
  • replace 'bus' windows and frames with 3/4" tempered glass and new frames
  • add additional blocking to secure refrigerator/freezer

 

Salon

  • add Plexiglas covers to wine rack
  • add 5 lb latches to drawers and cupboards presently secured by Sugatsune latches
  • replace 8 'bus' windows and frames with 3/4" tempered glass and new frames
  • replace broken dimmer switch on starboard wall switchbank

 

Master Stateroom

  • replace 9K BTU air hander with 12K BTU model

 

Master Head

 

  • tear-out to bare walls and rebuild with new floorplan
  • replace as much steel water pipe as possible with Unipipe

 

 

 

 

Port Guest Head

  • tear-out to bare walls and rebuild
  • replace as much steel water pipe as possible with Unipipe

 

Port Guest Stateroom

  • replace holding tank vent pipe located in outboard wall and add AC powered in-line blower

 

Stbd Guest Stateroom

  • replace air handler with 9K BTU unit from master stateroom

 

Lazerette

  • Paint floor, walls and ceiling with truck bed liner coating (Grizzly Grip?)
  • Install 2 Glendinning Cable master units for 50A / 240V shore power cables
  • Move 3-phase 100A / 208V shore power inlet to transom
  • Move fresh water inlet to transom
  • Move cable TV & telephone inlets to transom
  • Install 24V DC circuit breaker panel for cable master, transom lights and lazerette lights.
  • Breaker panel to be installed in watertight box

 

Fresh Water Tank

  • Install SS water-tight conduit(s) between engine room and lazerette. Conduit(s) to contain:
    • 2 x 50A / 240V shore power cables
    • 1 x 3-phase 100A / 208V shore power cable
    • 1 x fresh water line
    • 1 x coax cable TV line
    • 1 x shielded twisted pair telephone / DSL line
    • 1 x NMEA 2000 mini cable with bulkhead connectors at each end
    • 1 x 24V DC positive & negative lines to service circuit breaker panel in lazerette
  • Sandblast and paint with Ceramkote-2000
  • Replace fresh water outlet downpipe

 

Aft Deck

  • Remove shore power box and plug 3" deck penetrations
  • Remove fresh water outlet on deck and plug deck penetration

 

Engine Room

  • repair failing chilled water AC unit - compressor will not start